Cover Plates

OverviewThe Vimar Eikon 20696 is a 1-module round cover plate for panel mounting, built in metal with a lacquered finish and a face size of 40 x 80 mm. It can be installed horizontally or vertically, uses clamp mounting, and includes a label space on the...

OverviewThe Vimar Eikon 20666 Square Cover Plate is a 1-module square cover plate in die-cast metal for Vimar Eikon panel-mount installations. It finishes the front of a single-module position and gives the panel a finished look that matches the rest of...

OverviewThe Vimar Eikon 20687 is a 7-module round cover plate for built-in Eikon electrical installations. It is the visible trim piece that finishes a grouped switch or outlet layout, with a slim 210 x 80 mm footprint, 9 mm depth, and support for...

OverviewThe Vimar Eikon 20684 is a round 4-module cover plate for Eikon wiring devices, with a 142.5 x 80 x 9 mm footprint, clamp mounting, and support for horizontal or vertical installation.On a boat, this is the visible trim piece that finishes a...

OverviewThe Vimar Eikon 20682 is a round cover plate for Eikon switching points, with a 2-central-module layout, a 120 x 80 mm face size, and a 9 mm depth.It is the visible trim piece that finishes the switch or outlet position on the panel and gives the...

OverviewThe Vimar Eikon EXÉ 22653 is a 3-module cover plate that finishes an Eikon EXÉ device installation and leaves a clean face around the modules. The front size is 122 mm wide by 90 mm high, and it mounts horizontally or vertically.These plates are...

OverviewThe Vimar Eikon EXÉ 22654 is a 4-module cover plate that finishes a group of Vimar EIKON modular wiring devices with a clean, flush frame.It is built around the 4M format and the face size is about 144.5 mm wide by 90 mm high, which helps when...

OverviewThe Vimar Eikon EVO 21643 is a 4-module cover plate for Eikon wiring devices, laid out as 2+2 with 71 mm centre spacing. It finishes a 4-module mounting grid and can be fitted horizontally or vertically, so it works on helm panels, cabin...

OverviewThe Vimar Eikon EVO 21649 is a 5-module British Standard cover plate for finishing a bank of switches or outlets with a clean, labeled face on board. It mounts horizontally or vertically and supports up to 5 device inserts in a row or 1 device...

OverviewThe Vimar Eikon EVO 21642 is a 2-module cover plate used to finish the opening around Vimar Eikon wall devices, giving switches, sockets, and control modules a clean, aligned front.It can be mounted horizontally or vertically and is sized at...

OverviewThe Vimar Eikon EVO 21654 is a 4-module cover plate that finishes a matching Eikon mounting frame around switches, sockets, and other modular inserts. It is the visible trim piece on the bulkhead, so it is often chosen to match surrounding...