-
Sold out
Garmin Fenix Wrist Strap Kit, Fabric Hook & Loop, Extender Strap
OverviewThe Garmin 010-11814-02 is a wrist strap replacement kit for compatible Garmin fenix watches, built around a fabric strap with a hook-and-loop fastener and an extender strap. It is meant for...$24.99Out of stock
-
Sold out
Garmin tempe External Wireless Ambient Temperature Sensor, ANT+, 10 m Water Resistant, CR2032 3V
OverviewThe Garmin 010-11092-30 is an external wireless temperature sensor that sends ambient temperature to compatible Garmin devices using the 2.4 GHz ANT+ wireless communications protocol. It runs...$39.99Out of stock
-
Garmin GRF 10 Rudder Feedback Sensor Extension Cable, For GHP 12/20 Autopilots
OverviewThe Garmin GRF 10 extension cable is a length add-on for GRF 10 rudder feedback sensor installations that need more reach to a GHP 12 or GHP 20 autopilot system. It is offered in 5 m (16.4...$39.99 - $69.99 -
Add to Cart The item has been addedGarmin GRF 10 Rudder Feedback Sensor, For GHP 12, For GHP 20, Magnetic Sensor, IPX7, 2 m Cable
OverviewThe Garmin 010-11829-00 is a GRF 10 rudder feedback sensor that reports real-time rudder angle to a compatible Garmin autopilot ECU through a 12-pin rudder feedback connector. The attached...MSRP: $299.99$264.99Add to Cart The item has been added -
Sold out
Garmin GPS Antenna Cable, BNC Connectors, 10 m
OverviewThe Garmin 010-11454-00 is a 10 m (32 ft) antenna cable with BNC connectors on both ends for running an external GPS antenna to compatible Garmin marine electronics. It is used when the...$54.99Out of stock
-
Sold out
Garmin zumo Motorcycle Power/Ground Cable, For zumo 350LM/390LM/395LM/396LMT-S
OverviewThe Garmin 010-11843-01 is a hardwire power and ground cable used with a compatible zumo motorcycle mount bracket (sold separately) to keep a zumo 350LM powered from a 12 V DC system while it...$49.99Out of stock
-
Sold out
Garmin Automotive Suction Cup Mount, For zumo 340LM/345LM/350LM/390LM/395LM, Windshield or Dashboard
OverviewThe Garmin 010-11843-02 is an automotive suction cup mount for mounting a compatible zumo motorcycle navigator on a vehicle windshield or on a dashboard surface that is smooth and non-porous...$19.99Out of stock
-
Add to Cart The item has been addedGarmin Motorcycle Mount Bracket, For zumo 350LM, RAM Compatible
OverviewThe Garmin 010-11843-00 is a motorcycle mount bracket for the zumo 350LM GPS navigator. It gives you a fixed cradle that bolts to a standard 4-hole AMPS pattern with 38 mm x 30 mm hole...$19.99Add to Cart The item has been added -
Sold out
Garmin GLO Portable Friction Mount, For GLO/GLO 2/GLO for Aviation, Non-Skid Bottom, Silicone Case
OverviewThe Garmin 010-11832-00 is a friction mount that sits on a dashboard or helm to hold a Garmin GLO receiver steady without drilling or adding a permanent bracket. It uses a nonskid base to...$19.99Out of stock
-
Sold out
Garmin Vehicle Power Cable, 12V, Mini-USB, For nüvi Series/zumo 220/350LM/dezl 560LM/560LMT/nüLink! 1695 LIVE/eTrex 10
OverviewThe Garmin 010-11838-00 is a 12 V vehicle power cable that plugs into a standard 12-volt accessory socket and powers compatible Garmin devices through a built-in mini-USB connection.On a...$24.99Out of stock
-
Sold out
Garmin Montana Handlebar Mount, For Montana 600/650/650t, 22-32 mm Handlebars, Portrait or Landscape, Rubber Cushion
OverviewThe Garmin 010-11654-07 is a handlebar mount that secures a compatible Garmin handheld GPS in a snap-in cradle on a round bar or rail with a 22 to 32 mm diameter. It supports portrait or...$49.99Out of stock
-
Add to Cart The item has been addedGarmin 200/50 kHz Transducer Mount Replacement Kit, For Plastic Transom-Mount Depth/Temp Transducers
OverviewThe Garmin K00-00118-01 is a replacement transom-mount bracket kit for a plastic Garmin transducer that reads depth and water temperature in the 200/50 kHz range. It is meant for the common...$20.91Add to Cart The item has been added
