Sold out Out of stock Furuno - 000-159-702 Data Cable - 4 Pin NMEA Cable: The Lifeline of Your Marine Navigation System Introducing the next generation of marine connectivity: a robust, 5-meter long NMEA (National Marine Electronics Association) cable with a reliable 4-pin connector. Designed for harsh marine... MSRP: $45.00 Out of stock Out of stock Compare
Sold out Out of stock Garmin External GPS/Iridium Antenna with Adapter Cable, For Montana 700i/710i/750i/760i, Passive Antenna, Magnetic Base, 1.5 m Antenna Cable, 0.2 m Adapter Cable OverviewThe Garmin 010-12881-06 is an external passive GPS and Iridium antenna with an adapter cable for moving satellite reception to a better spot while your handheld stays where you can reach it.It uses a magnetic base for quick placement on a steel... MSRP: $99.99 Out of stock Out of stock Compare
Sold out Out of stock Garmin OnDeck 2-Pin Power Cable, For OnDeck Hub, Threaded OverviewThe Garmin 010-13009-05 is a threaded 2-pin power cable for a compatible OnDeck Hub, used to tie the hub into your boat’s DC system.The lead is 6 ft (1.8 m) and includes an in-line fuse holder with a 7.5 A, 42 V fast-acting fuse, which keeps... MSRP: $29.99 Out of stock Out of stock Compare
Sold out Out of stock Garmin Video Extension Cable, 15 m, BNC Male-to-Male OverviewThe Garmin 010-11376-04 is a 15 m (49.21 ft) male-to-male video extension cable that adds distance between a compatible Garmin marine camera and your display or video input without changing the rest of your setup.It uses BNC male connectors on... MSRP: $59.99 Out of stock Out of stock Compare
Sold out Out of stock Garmin NMEA 0183 Power/Hailer Cable, For VHF 315, 6.5 ft, 8-Pin OverviewThe Garmin 010-12769-01 is a 6.5 ft (2 m) 8-pin power and data cable with hailer wiring for compatible Garmin VHF radios, keeping power, NMEA 0183 leads, and hailer connections in one harness.It is commonly used with the Garmin VHF 315 and VHF... MSRP: $79.99 Out of stock Out of stock Compare
Add to Cart The item has been added Garmin 8-Pin Transducer to 4-Pin Sounder Adapter Cable, For STRIKER and STRIKER Plus OverviewThe Garmin 010-12719-00 is an adapter cable that lets you connect an 8-pin transducer to a Garmin sounder or fishfinder with a 4-pin sonar port.This is the right piece when the plug on your transducer and the sonar connector on the display do not... MSRP: $29.99 Add to Cart The item has been added Compare
Add to Cart The item has been added Garmin - Yamaha Engine Bus to J1939 Adapter Cable OverviewThe Garmin 010-12770-00 is a Yamaha Engine Bus to J1939 adapter cable used to link a Yamaha Engine Bus Multi-Hub Assembly to the J1939/Engine port on compatible Garmin chartplotters. The cable is 1 m (3.3 ft) long, with a Yamaha 4-pin connection... MSRP: $29.99 Add to Cart The item has been added Compare
Add to Cart The item has been added Garmin NMEA 2000 Backbone/Drop Cable, 6 m, Micro-C, Case of 8 OverviewThe Garmin 010-11076-01CASE is a 6 m (20 ft) NMEA 2000 backbone/drop cable sold as a case pack for building or extending a NMEA 2000 network on board.It uses NMEA 2000 micro connectors and can be run between T-connectors as a backbone extension,... MSRP: $279.99 Add to Cart The item has been added Compare
Sold out Out of stock Garmin NMEA 2000 Backbone/Drop Cable, 2 m (6 ft), Case of 10 OverviewThe Garmin 010-11076-00CASE is a case of ten NMEA 2000 backbone/drop cables, each 2 m (6 ft) long, used to extend a NMEA 2000 backbone or run a drop from a T-connector to a device.These cables use the NMEA 2000 micro connector format (Micro-C)... MSRP: $299.99 Out of stock Out of stock Compare
Add to Cart The item has been added Garmin NMEA 2000 Backbone/Drop Cable, 1 ft, Male-to-Female, 10pk OverviewThe Garmin 010-11076-03CASE is a 1 ft (0.3 m) NMEA 2000 backbone/drop cable packaged as a case of 10 for building and extending an NMEA 2000 network on board. It works as a short backbone jumper between adjacent T-connectors, or as a short drop... MSRP: $249.99 Add to Cart The item has been added Compare
Sold out Out of stock Garmin Steer-by-Wire Interconnect Cable, 3 m, For GHP Reactor Autopilot CCU, Bare Wire Buzzer Connections OverviewThe Garmin 010-11351-50 is a 3 m interconnect cable that links a Garmin Reactor autopilot CCU (course computer unit) to a steer-by-wire controller.Use it when your boat has steer-by-wire steering and the autopilot needs the dedicated... MSRP: $49.99 Out of stock Out of stock Compare
Garmin Mast Cable, For gWind and gWind Race Transducers, 11mm OD OverviewThe Garmin Mast Cable is the in-mast cable run that links a gWind or gWind Race transducer at the masthead to your wiring run below. It is offered in 25 m and 40 m (131 ft) lengths to match different mast heights and where the cable exits the... $84.99 - $109.99 Compare
