Cover Plates

OverviewThe Vimar Eikon EVO 21653 is a 3-module cover plate that finishes the opening around Eikon switches, outlets, and control modules, leaving a clean edge on the wall or panel.Overall size is 117.30 mm wide by 105.30 mm high with 9.80 mm depth. It...

OverviewThe Vimar Eikon 20647 Classic cover plate is a 2-module trim plate for British standard switches and sockets in the Vimar Eikon range. Its face measures 94.8 x 94.8 mm with a depth of 9.7 mm, so it keeps a square footprint with a low projection...

OverviewThe Vimar Eikon 20654 is a 4-module Classic cover plate for finishing Eikon switches, outlets, and control modules on board. It measures 142.30 mm wide by 84.80 mm high with an 8.90 mm depth, so it fits standard 4-module Eikon installations on...

OverviewThe Vimar Eikon EXÉ is a metal cover plate that finishes off a Vimar Eikon modular switch or control point with a clean, square frame. It uses a 90 x 90 mm faceplate format and carries an IP00 rating, so it belongs in dry, protected locations...

OverviewThe Vimar Idea 16749 Classica cover plate is an 18-module trim plate for Vimar IDEA switch and control layouts, built in technopolymer with a 206 x 222 mm face size, 11 mm depth, and support for either horizontal or vertical mounting. It is a...

OverviewThe Vimar Idea 16748 Classica cover plate is a 12-module cover plate for the Vimar Idea system, built in technopolymer with a glossy finish and sized at 206 x 150 x 11 mm. It can be mounted horizontally or vertically and uses clamp fastening with...

OverviewThe Vimar Idea 16744 Classica cover plate is a 4-module finishing plate for Vimar Idea electrical installations, with a 145 x 82 x 8.9 mm format, horizontal or vertical mounting, and clamp-mount fastening. It uses halogen-free thermoplastic and...

OverviewThe Vimar Idea 16782 Classica cover plate is a 2-module die-cast metal plate for panel mounting in the Idea range. It measures 40 x 137 x 8.9 mm, can be mounted horizontally or vertically, and has a lacquered glossy surface.This is a finishing...

OverviewThe Vimar Idea 16733 Classica is a 3-module cover plate range for Vimar IDEA switching devices, with clamp mounting and support for horizontal or vertical installation. On the metal versions in this family, the front size is 120 x 82 mm with a...

OverviewThe Vimar Idea 16764 Rondò is a 4-module cover plate for Vimar Idea switch and outlet layouts, with clamp mounting, horizontal or vertical orientation, and a face size of 148 x 82 mm. It sits close to the panel at 9 mm deep and includes a label...

OverviewThe Vimar Idea 16763 Rondò cover plate is a 3-module cover plate for IDEA switching devices, with clamp mounting, horizontal or vertical orientation, and a 122.8 x 82.0 x 8.9 mm face size.It is a trim piece for built-in switch positions where you...

OverviewThe Vimar Idea 16754 Rondò cover plate is a 4-module cover plate for the Vimar Idea wiring system, sized 148 x 82 x 9 mm and set up for either horizontal or vertical mounting. It is the visible trim piece that finishes the switch or outlet...