Devices

OverviewThe Vimar Idea MASTER rotary dimmer is a phase cutting dimmer that mounts flush and runs on 230 V AC, 50 Hz, handling 3-200 W LED loads, 10-200 W CFL loads, 40-300 VA electronic transformers, and 40-400 W incandescent lamps. Its IP40 rating makes...

OverviewThe Vimar Idea 16563 is a flush-mounted 230 V AC dimmer for 100-500 W incandescent lamps, with push-push switching and rotary level control.Operation is straightforward on board: press to turn the circuit on or off, then turn the knob to set...

OverviewThe Vimar Idea 16557 is a 120 V~ rotary dimmer module for the Idea device system, rated for 30-500 W incandescent lamps and 30-300 VA ferromagnetic transformers (50-60 Hz).On board, this is used where your lighting is on a 120 V AC circuit, such...

OverviewThe Vimar Net Safe 16337 is an RJ45 phone jack module with an 8-position, 8-conductor (8/8) connection and rear screw terminals.It is an unshielded (not screened) jack intended for low-voltage data and telecommunication runs where you want an...

OverviewThe Vimar Net Safe is an RJ45 Cat5e outlet module with a Panduit (MINI-COM) connector for terminating onboard Ethernet runs at a wall plate or console panel.It supports T568A or T568B wiring and uses an 8-contact RJ45 interface, so standard Cat5e...

OverviewThe Vimar Idea 16338 is a double RJ11 phone socket module with two 6-position, 4-conductor (6/4) jacks and screw terminals for wiring behind the panel.It is a flush-mounted module for Vimar IDEA domestic switching device installations, with an...

OverviewThe Vimar Idea 16350.S is a flush-mounted BNC coaxial socket insert that brings a bayonet-style BNC jack to a Vimar Idea module position for onboard coax connections.It is a solder-termination socket for RG58, RG59/62, and RX93 coax cables and is...

OverviewThe Vimar Idea coaxial TV-RD-SAT socket outlet is a 1-outlet wall module for distributing TV, radio, and satellite signals on board over coax from 5 to 2400 MHz. The range covers both a through-line version with 10 dB shunt attenuation for...

OverviewThe Vimar Idea 16331 is a coaxial socket outlet with an F-type female connector for bringing a TV or satellite coax line to a finished panel on board.It supports signals from 0 to 2400 MHz on 75 ohm coax, which covers common TV and satellite...

OverviewThe Vimar Idea 16361 is a 9-pin SUB-D socket connector module that brings a DB9-style connection to a flush-mounted position within the Vimar IDEA wiring device system. It takes up 2 modules and has an IP20 protection level for protected interior...

OverviewThe Vimar Idea 16333 is a flush-mount RCA (Cinch) outlet module that brings three signal connections to a clean, wall-plate style finish on board. It installs as a 1-module insert and uses screw terminals on the rear for wiring.It is rated IP20...

OverviewThe Vimar Idea 3-sound-sequence electronic chime is an acoustic signalling unit for 12 V call or doorbell circuits that mounts flush into a Vimar Idea modular plate. It runs on 12 V~ 50-60 Hz or 12 V d.c. (SELV) and gives three sound options:...