Devices

OverviewThe Vimar Idea 16016 is a 2-pole, 1-way rocker switch rated 16 AX at 250 V~ for the Vimar IDEA modular range. It has an IP40 rating for dry, protected interior locations and it is commonly used for AC switching where you want a clean,...

OverviewThe Vimar Idea 16021 is a 1-way rocker switch family for flush-mounted modular installations, built around a 1-pole 16 AX mechanism rated at 250 V. It supports luminous operation with a signalling unit, uses screw-terminal wiring, and carries an...

OverviewThe Vimar Idea 16001 is a 1-module 1-way rocker switch for the Vimar Idea modular range, rated 16 AX at 250 V with IP40 protection. It uses screw terminals, has a thermoplastic body with a matte finish, and measures 24.8 x 50.1 x 36.5 mm with a...

OverviewThe Vimar Idea is a USB socket outlet for the Idea modular wiring range, built as a 1-module insert with screw terminals and a flush-mounted body. It measures 24.80 x 50.10 x 41.30 mm, has IP20 protection, and uses a halogen-free thermoplastic...

OverviewThe Vimar Idea is a 2-module coaxial TV-RD-SAT socket outlet for a single incoming feed with separate TV-RD male and SAT female F-type outputs. It works across 5 to 2400 MHz and carries 1 dB attenuation, which keeps signal loss low at the outlet...

OverviewThe Vimar Idea TORCIA hand lamp is a built-in 2-module emergency and portable light for 230 V~ 50-60 Hz installations. It combines a fixed charging point with a removable LED hand lamp, so it stays docked and charged in normal use and can be...

OverviewThe Vimar Idea TORCIA is a built-in emergency hand lamp for Vimar Idea modular installations where a removable light needs to stay charged at the wall point. It runs on 120 V~ 50-60 Hz, uses a rechargeable and replaceable Ni-MH battery, and gives...

OverviewThe Vimar Idea 16558 is a 4-position slide switch for fan-coil speed adjustment in the IDEA range. It is a 1P switch rated at 6 A and 250 V, with IP40 protection and a flush-mounted format for built-in installations.For marine use, this type of...

OverviewThe Vimar Idea is a 1-pole normally closed push button rated at 16 A and 250 V~, offered here in ivory or gray. It is a built-in insert for the Vimar Idea modular system, with snap-in fixing, a thermoplastic body with a matte finish, and IP40...

OverviewThe Vimar Idea 16107 is a flush-mounted modular push button for the Idea range, with a 1P NO contact, an NC auxiliary contact, and a 16 A 250 V~ rating. It suits sheltered interior switching points on board where you need momentary control and...

OverviewThe Vimar Idea 17005 Rocker Button is a 1-module, flush-mounted reversing switch rated 16 AX at 250 V, with IP40 protection and screwed terminals. Within a compatible IDEA installation, it is used as an intermediate switch for circuits controlled...

OverviewThe Vimar Idea 17003 is a 1-pole, 16AX, 250 V~ two-way rocker switch in the IDEA reduced-module format, with IP40 protection for interior mounting. It is used when one circuit needs control from two locations, such as cabin lights at both the...