Cover Plates

OverviewThe Vimar LINEA is a 4-module cover plate for modular wiring devices, with support for horizontal or vertical mounting and a front size of 146.6 x 88 mm. It is used as the visible trim for a 4-module point and suits flush-mounted and built-in...

OverviewThe Vimar EIKON Series is a family of 3-module metal cover plates for Vintage controls, with a 122 x 90 mm face size, a depth of 7.15 mm, and support for either horizontal or vertical mounting. Across this range, the plate keeps the same...

OverviewThe Vimar EIKON Series is a 5-module British cover plate made to finish off a switch or outlet layout with a clean, flush look on a bulkhead or interior panel. It measures 159.30 mm wide by 90.00 mm high, with depth varying from 10.15 mm to 11.55...

OverviewThe Vimar EIKON 3-module electronic cover plate is a trim plate for three-module switch and control positions where the finish is meant to be part of the interior, not just a cover over the mechanism. It measures 118 x 106 mm, mounts horizontally...

OverviewThe Vimar Plana series is a 5-module British Standard cover plate used to finish a BS-format bank of switches, outlets, or other modular inserts in the Plana range. The plate footprint is 155 mm wide by 95 mm high with a 9 mm profile, and it can...

OverviewThe Vimar Plana Series is a 3-module cover plate that finishes a Plana device position and hides the support frame for a clean look around the inserts. It can be mounted horizontally or vertically, and it carries an IP00 rating, so it belongs in...

OverviewThe Vimar Plana Series is a 4-module cover plate that finishes a Plana modular device group with a clean look that sits flush on the surface.It can be mounted in horizontal or vertical orientation and uses clamp mounting so it snaps onto the...

OverviewThe Vimar Plana Series is a 2-central-module cover plate that finishes a Plana wiring device with a tidy faceplate around the installed modules.It measures 120 mm wide by 80 mm high with a 9 mm depth, and it can be installed either horizontally...

OverviewThe Vimar EIKON Series is a family of 8-module (4+4) Classic cover plates for larger switch and outlet groupings in a compatible EIKON installation. The plate size is 142.3 x 155.8 mm with a 10 mm depth, it can be mounted horizontally or...

OverviewThe Vimar Plana Series is a 6-module (2+2+2) cover plate with a 71 mm distance between centres for finishing off a matching Plana modular installation. It spans 222 mm wide by 80 mm high, with a low-profile depth around 9 mm, so it sits cleanly...

OverviewThe Vimar Plana Series is a 4-module (2+2) cover plate with 71 mm distance between centres for finishing Vimar Plana modular switching and outlet points on board. The plate measures 151 mm wide by 80 mm high, with a 9 mm depth, so it helps you...

OverviewThe Vimar EIKON Series is a range of 2-module round British cover plates for interior switch and socket installations, with a 95 x 95 mm face size, 9 mm depth, and horizontal or vertical mounting.Across the family, the plate format stays the same...